ATEN VK0100 User Manual Download Page 207

Page: 207 / 302

Chapter 4. ATEN Configurator (VK6000)

191

Note:

A valid access key should only contain upper-case alphabets,

lower-case alphabets, and/or numerals.

: An access key is required

to upload Viewers to the controller and download Viewers from a
mobile device.

: An access key is

not

required to upload Viewers to the

controller and download Viewers from a mobile device.

: The access key has been changed on the controller’s web

interface (Dashboard). To change the lock status, click on the icon and
type the new access key to proceed.

4. Click

Upload to Controller

Note:

By default, the project file is uploaded along with your selected

Viewers. To only upload the selected Viewers, click

Also upload

project file

to disable the function.

Summary of Contents for VK0100















































































































































































































































































































Search results

Summary of Contents for VK0100

Reviews:

ATEN VK0100, User Manual, Page: 207 / 302

Search results

Summary of Contents for VK0100

Reviews: