manualshive.com logo in svg

ATEN VK0100, User Manual, Page: 53 / 302

Share
Download
ATEN VK0100 User Manual Download Page 53

Chapter 2. Hardware Setup and Panel Oper

-

37

LED Indications

Refer to the table below for the status descriptions of a Control Pad indicated 
by button LEDs.

Button LED Status

LED Activity

Control Pad Status

A button LED

lights orange

The Control Pad is powered on and the 
button is currently off.

A button LED

lights white

The Control Pad is powered on and the 
button is currently on.

A button LED

blinks orange and 
white repeatedly

The function assigned to the button is 
being executed.

All button LEDs

blink orange and 
white once

The Control Pad is restoring its default 
settings.

All button LEDs

blink orange and 
white repeatedly

The firmware of the Control Pad is being 
upgraded.

Summary of Contents for VK0100















































































































































































































































































































Reviews:

No comments