ATEN VK0100 User Manual Download Page 219

Page: 219 / 302

Chapter 5. ATEN Database Generator

203

Function

– Lists the actions created for a device. A Function name

must include an asterisk (*) if you are adding a drop menu to the
Command string. Double-click to edit the function name.

Command

– Shows the command string created for the action.

Double-click to edit the string.

Message

– The Message column is used to create and store feedback

and/or queries for the corresponding command.

For more information about adding feedback, see

Testing

Commands

, page 213.

For more information about creating queries, see

Configuring

Queries

, page 215.

Click

Send

to connect to a controller and test the typed command.

Click to select a controller from the list. Use the

Refresh

button to

refresh the list. To browse for controllers in the LAN, click the

Intelligent Search

button or type the IP address of the controller.

Click

to proceed to test the command. For details, see

Testing

Commands

, page 213.

Summary of Contents for VK0100















































































































































































































































































































Search results

Summary of Contents for VK0100

Reviews:

ATEN VK0100, User Manual, Page: 219 / 302

Search results

Summary of Contents for VK0100

Reviews: