ATEN VK0100, User Manual, Page: 245 / 302

Chapter 6. Remote PC Control
229
Example 2:
Follow the steps below to create a quick access button for opening and playing
a specific PowerPoint file. You can follow the same logic to create a button for
opening and playing a specific media file.
1. Create an outlook for the interface.
a) In ATEN Configurator, click the Design tab.
b) Click Add Page and rename the page to “presentation”.
c) Customize the interface and add control buttons using the Properties
settings in the right-hand column. For details, see Design , page 106.
2. Define the action of each button. For example, for the PowerPoint button to
open and start a slide show when pressed, do the following:
a) In the preview pane, click the PowerPoint button.
b) Select ControlAssist (LAN) .
c) Double-click [PowerPoint] Open file and then [PowerPoint] Start
presentation .
d) Configure the commands and arrange them in the order of execution.
Tip: The asterisk (*) at the end of a Function indicates that it requires
configuration in the Commands column.
For details on supported control actions, see Supported PC Control Actions ,
page 230.
3. From the Upload tab, deploy and back up the project to the controller. For
details, see Upload , page 189.
2b
2a
2c
2d