ATEN VK0100, User Manual, Page: 79 / 302

Chapter 3. Web-Based Configuration and
63
Settings
The Settings view contains tabs to provide options to configure the controller.
The page is divided into two parts, the
Interactive Display Panel which is
used to configure the options and the Top Bar which provides icons to exit the
settings page and log out of the web session.
The Settings page opens on the General tab, as shown below:
The General tab contains network, system time, and firmware upgrade settings.
Controller Info Provides network and identification information pertaining to the
controller.
Š
Device Name: Sets the device name.
Š
Controller ID : Displays the controller ID # set on the rear of the
unit.
Š
IP Address : Provides the IP address of the controller.
Š
MAC Address : Provides the hardware MAC address of the
controller.