ATEN VK0100 User Manual Download Page 25

Page: 25 / 302

Chapter 1. Introduction

Requirements

Prepare the following equipment and make sure your equipment meets the
minimum requirements specified below.

Hardware devices to be controlled by your ATEN controller

Bi-directional RS-232/422/485 serial devices

One-way IR or serial transmitter hardware devices (for Control Box
only)

Relay hardware devices

Digital input hardware devices (for VK2100 and Control Pad only)

Digital output hardware devices (for VK2100 only)

Ethernet-controlled PJLink, Telnet, ONVIF, TCP, UDP, HTTP, or
HTTPS devices

KNX IP interfaces for connecting KNX-compliant devices

Cables

One Cat 5e/6 Ethernet cable used to connect the ATEN controller to
the local area network

(Optional) For serial devices with DB9 connectors, use standard
straight-through cables.

A computer for configuring your ATEN Control System

Make sure the computer runs Windows 7, 8, 8.1, 10, or any of the later
versions.

Make sure to install .NET Framework version 4.5 or any of the later
versions to the computer before using the ATEN Database Generator.

(Optional)

Up to 10 mobile devices for remote control

Note:

A license is required for each mobile device. For detailed

information, see

Licenses for Mobile Control

, page 65.

Summary of Contents for VK0100















































































































































































































































































































Search results

Summary of Contents for VK0100

Reviews:

ATEN VK0100, User Manual, Page: 25 / 302

Search results

Summary of Contents for VK0100

Reviews: