ATEN VK0100, User Manual, Page: 172 / 302

ATEN Control System User Manual
156
1. Click a source button to display the Button Action panel.
2. In the Button Action panel, select Change Button Name .
3. From the Function list, double-click the Viewer page where the source
button is located. In this example, double-click the Video Wall option.
The Change Button Name command is added.
4. From the Commands list, double-click the Change Button Name
command and configure the following.
Š Select the ID of the display button to indicate the location of print the
text. In this example, it is the video wall’s ID.
Š
Type the text you wish to show when the source button is tapped. In
this example, enter “PC”.
5. Follow steps 1 to 4 to configure each of the source buttons.