ATEN VK0100, User Manual, Page: 116 / 302

ATEN Control System User Manual
100
I/O Device Properties
Click an I/O device from the Device
Configuration list and select
Input
(VDC) , I nput (Dry Contact) , or Output
to configure its properties.
Š
Name: Type to set the device name.
Š
Add Device: Adds devices. You can
use either of the following methods to
add devices:
Š
Type the device name in the Name
field and click Add Device .
Š
Click the arrow button (following the
Add Device button) and select add
device from library to open the device
library. Double-click a device to bring in
its information and settings.
Š
Category: Displays the category of
the selected device.
Š
Brand: Displays the brand of the
selected device.
Š
Model: Displays the model of the
selected device.
Š
Version: Shows the firmware version selected for the device. Use the drop-
down menu to select a different firmware version. Click the menu box next
to the version number to open a PDF with the version history. The version
history and different versions for a device can be manually added/updated
via the Database Generator (see step 3 of
Editing / Adding a New Device ,
page 200).
Š
Lower Threshold & Upper Threshold: Set the thresholds according to the
hardware device you are connecting and then configure a Monitor (see
page 162).
Š
Advance Settings: Click Advanced to display the Delay Interval setting.
Š
Delay Interval: Sets a time delay for each command before they are
sent to the device.