AT&T SB67030 System Administrator Manual Download

Page: 27 / 150

AT&T SB67010 Gateway, SB67030 Deskset System Administrator’s Guide

System Description

H A P T E R

YSTEM

ESCRIPTION

This section provides a description of system functions and features. The complete
telecommunications system includes:

AT&T SB67010 PSTN Gateway - Provides an interface between the IP-based
system and the Public Switched Telephone Network (PSTN). The Gateway
controls system components and access to external communications
networks.

AT&T SB67030 Deskset - In addition to being used for phone calls, the
Desksets can also be used to customize the system.

AT&T SB67040 Cordless Accessory Handset (Optional) - Duplicates many of
the Deskset features and provides a high degree of mobility.

AT&T TL7600 Cordless Headset (Optional) - Replaces the Deskset corded
Handset to provide hands-free operation and mobility.

WEB User Interface (WEBUI) - Consists of web pages with editable settings
that allow you to administer the system.

Summary of Contents for SB67030























































































































































Search results

Summary of Contents for SB67030

Reviews:

Related manuals for SB67030

Brands by name

Popular brands

AT&T SB67030, System Administrator Manual

Search results

Summary of Contents for SB67030

Reviews:

Related manuals for SB67030

Brands by name

Popular brands