AT&T SB67030 System Administrator Manual Download

Page: 132 / 150

Cordless Headset Troubleshooting

132

AT&T SB67010 Gateway, SB67030 Deskset System Administrator’s Guide

ORDLESS

EADSET

ROUBLESHOOTING

For more information about the corrective actions recommended in this troubleshooting section, see the “AT&T TL7600
Cordless Headset User’s Guide”.

Symptom

Probable Cause

Corrective Action

Headset does not work at all.

There is no power to the device.

Confirm the battery is installed and charged
correctly.

Place the Headset into the accessory Charger.
Ensure the Charger is securely plugged into an
outlet not controlled by a wall switch.

If the battery is completely depleted, it can take up
to 10 minutes to charge the battery. In this case,
the ON/OFF LED will remain off and you will not be
able to use the device. After 10 minutes of
charging, try pressing the

ON/OFF

key on the

Headset or the

HEADSET

key on the Deskset to

wake it up.

The light on the Headset is
orange/blue and the Headset
does not work.

The Headset is not registered.

If the Headset is registered, the light should be
blue.

If the Headset light is flashing orange and blue, it
needs to be registered to a Deskset.

Summary of Contents for SB67030























































































































































Search results

Summary of Contents for SB67030

Reviews:

Related manuals for SB67030

Brands by name

Popular brands

AT&T SB67030, System Administrator Manual

Search results

Summary of Contents for SB67030

Reviews:

Related manuals for SB67030

Brands by name

Popular brands