AT&T SB67030 System Administrator Manual Download Page 29

Page: 29 / 150

System Description

AT&T SB67010 Gateway, SB67030 Deskset System Administrator’s Guide

Figure 27 provides an illustration and description of the Gateway display.

Figure 27. Front Panel Description

Status LEDs

Power LED

Menu Navigation Keys

Key

Used To:

LED

Description

Navigate through the menus, and to
increment/decrement editable fields.

Move the highlight bar to the previous or
next item in the list, respectively.

Dual-color Status LEDs indicate the status for
each PSTN line. Indications include:

Disconnected -

Red

Connected - Off

In use: -

Green

steady

Ringing -

Green

flashing quickly

Line LED flash red after lines are connected
(while matching line impedance).

Display the main menu when in idle mode or
while in network detection mode.

Save current setting and return to previous
menu.

Terminates current operation without saving
new settings and to return to the previous
menu.

Power LED illuminates when power is
available.

Summary of Contents for SB67030























































































































































Search results

Summary of Contents for SB67030

Reviews:

Related manuals for SB67030

Brands by name

Popular brands

AT&T SB67030, System Administrator Manual

Search results

Summary of Contents for SB67030

Reviews:

Related manuals for SB67030

Brands by name

Popular brands