AT&T SB67030 System Administrator Manual Download Page 20

Page: 20 / 150

Installation

AT&T SB67010 Gateway, SB67030 Deskset System Administrator’s Guide

To connect the corded Handset and an optional corded Headset

Figure 13. Handset Plug

Connect the corded Handset:

1. Plug the coiled end of the Handset cord into the Handset jack on the

left side of the telephone, as identified in Figure 13.

2. Plug the end of the Handset cord with the five-inch straight line into

the Handset, then hang up.

Connect an optional corded Headset:

1. Plug an optional corded

headset into the RJ9
connector on the bottom
of the Deskset, as indicated
in Figure 14.

2. Press

HEADSET,

shown in

Figure 15 to use the
corded headset.

The corded headset
takes precedence over
the cordless Headset.

If the user unplugs the corded headset during an Active Call,
Voicemail playback, or while recording, the audio will switch to the
speakerphone.

If the corded handset is off hook, audio will switch to the handset.

Figure 15. Headset key

Handset

Cord

Jack

Optional Corded Headset Jack

Figure 14. Install Optional Headset

Headset

Summary of Contents for SB67030























































































































































Search results

Summary of Contents for SB67030

Reviews:

Related manuals for SB67030

Brands by name

Popular brands

AT&T SB67030, System Administrator Manual

Search results

Summary of Contents for SB67030

Reviews:

Related manuals for SB67030

Brands by name

Popular brands