Getting Started
42
AT&T SB67010 Gateway, SB67030 Deskset System Administrator’s Guide
Call Forward - No Answer to an Outside Line
You may use the Telephone Line to Telephone Line Call Timer to limit the duration of calls transferred to outside lines, because
they use two of your telephone lines. (See Telephone Line to Telephone Line Call Timer
“Basic Settings” on page 63
.)
To forward all unanswered calls to an outside line:
Figure 39. Call Fwd-NA Settings
Figure 40. Call Forward Confirmation
1. Perform the
“To display the Admin Settings menu:”
procedure on
page 37
.
2. Press
1
on the dial pad to display the
Call Fwd-NA Settings
screen shown
in Figure 39, with the current Call Forward target in the top field.
3. Press the or navigation key until
is highlighted, as shown in
Figure 39.
4. Press the navigation key to move to the
to Line:
editable field. A blinking
cursor appears in the number field.
5. Enter in a valid phone number. For outside calls, first dial
9
.
6. Press the navigation key to highlight
Call Fwd-NA Delay
.
7. Press the or navigation key to adjust the delay in five-second increments.
8. Press
to accept the change and display the Admin Settings menu.
NOTE:
The minimum delay is five seconds and the maximum
delay is 45 seconds. The default setting is 15 seconds.
NOTE:
The screen shown in Figure 40 displays when a call is
received.
