AT&T SB67030 System Administrator Manual Download Page 117

Page: 117 / 150

Gateway Troubleshooting

117

AT&T SB67010 Gateway, SB67030 Deskset System Administrator’s Guide

Bypass port does not work
during power failure.

The PSTN line is not in the
correct port.

Make sure there is a PSTN line plugged into Line 4.

Make sure an analog phone is plugged into the
bypass port (using a modular line cord).

Red line lights do not flash
when the telephone line
cords are plugged into the
Gateway after power is
switched on.

Line calibration allows the
Gateway to adjust its
performance depending on the
phone lines’ characteristics. The
Gateway may not have
performed calibration.

Make sure an Ethernet cable is plugged into the port
marked LAN.

Unplug the telephone line and wait two full seconds
for the Gateway line LED to turn red before plugging
it back in.

Symptom

Probable Cause

Corrective Action

Summary of Contents for SB67030























































































































































Search results

Summary of Contents for SB67030

Reviews:

Related manuals for SB67030

Brands by name

Popular brands

AT&T SB67030, System Administrator Manual

Search results

Summary of Contents for SB67030

Reviews:

Related manuals for SB67030

Brands by name

Popular brands