AT&T SB67030 System Administrator Manual Download Page 23

Page: 23 / 150

Installation

AT&T SB67010 Gateway, SB67030 Deskset System Administrator’s Guide

To install the Gateway:

1. To connect the Gateway to Earth ground:

a. Loosen the screw retaining the silver grounding terminal on the back of the Gateway, as identified in Figure 22.

b. Insert the spade/fork end of the grounding cable under the grounding terminal.

c. Tighten the screw.

d. Connect the alligator clip end of the grounding cable to the building ground point, usually located at the electrical

breaker box.

Figure 22. Gateway Grounding

WARNING:

If you are unsure about the location of the building ground point or how to ground

the Gateway, contact the facilities manager.

Grounding Terminal (Back Panel)

Summary of Contents for SB67030























































































































































Search results

Summary of Contents for SB67030

Reviews:

Related manuals for SB67030

Brands by name

Popular brands

AT&T SB67030, System Administrator Manual

Search results

Summary of Contents for SB67030

Reviews:

Related manuals for SB67030

Brands by name

Popular brands