Getting Started
39
AT&T SB67010 Gateway, SB67030 Deskset System Administrator’s Guide
Call Fwd-NA
Each Deskset defaults to forwarding unanswered calls to Voicemail after they ring for 15 seconds. You can change the target
destination to another extension or an external line, or the administrator can turn off call forwarding when there is no answer.
You can change the delay to a number between five and 45 seconds.
To set up Call Forward No Answer:
Figure 34. Call Fwd-NA Settings
1. Perform the
“To display the Admin Settings menu:”
procedure on
page 37
.
2. Press
1
on the dial pad to display the
Call Fwd-NA Settings
screen shown in
Figure 34.
3. Press the or navigation key to toggle the setting to one of the following
destinations.
“Call Forward - No Answer to Voicemail” on page 40
.
“Call Forward - No Answer to an Extension” on page 41
.
“Call Forward - No Answer to an Outside Line” on page 42
.
NOTE:
This setting controls the Call Forward-No Answer
destination. The default setting is
Call Fwd-NA Target
to Voicemail. If Call Forward All is on, these settings do
not apply. Call Forward All is set using the User Settings
at the individual Deskset
.
