AT&T SB67030 System Administrator Manual Download Page 115

Page: 115 / 150

Gateway Troubleshooting

115

AT&T SB67010 Gateway, SB67030 Deskset System Administrator’s Guide

Gateway screen displays

Kicked

. (Continued)

The Gateway has returned to the
system after being deleted from
the system.

Reset to factory defaults by using a paper clip to
press and hold the reset switch (located on the front
of the unit) for more than five seconds. See

“Reintroducing a Gateway Into the System” on
page 106

The maximum number of
Gateways for the site has been
reached. A system can have only
four Gateways.

A Gateway must be removed from the network and
deleted from the system before this Gateway can be
added.

Deskset cannot make or
receive phone calls and the
Gateway screen displays

Synchronizing

The Gateway cannot locate the
DHCP server or the Gateway
cannot obtain an IP address from
the DHCP server, or is the only
device on the subnet.

The Gateway may temporarily display

Synchronizing…

for a few seconds. This is normal

and does not indicate a problem.

If this Gateway is the first device on the network,

Synchronizing

displays continuously until another

device is connected to the network.

Confirm that the first three octets of the Gateway IP
address match the IP addresses of other system
devices and that of the PC.

If you need to use static IP addresses, ensure that all
system devices and any PCs from which you access
the WEBUI have static IP addresses that are on the
same subnet. These IP addresses start with 169.254.

Symptom

Probable Cause

Corrective Action

Summary of Contents for SB67030























































































































































Search results

Summary of Contents for SB67030

Reviews:

Related manuals for SB67030

Brands by name

Popular brands

AT&T SB67030, System Administrator Manual

Search results

Summary of Contents for SB67030

Reviews:

Related manuals for SB67030

Brands by name

Popular brands