Introduction
15
VG-Series Modero Touch Panels
1700VG Panel Specifications (Cont.)
Rear Panel Components
(Cont.):
(Side panel location on NXD-Wall Mount panels)
USB connector (2):
• The two Type-A USB ports can connect up to two external keyboard or
mouse devices for use with Virtual PC applications.
• These ports can be used to communicate to a PC and transfer pass-thru
touch control from the external devices, thru the NXA-AVB/RGB, to the
PC, and then back again. Refer to the
Preparing your panel for Pass-
Thru Control (using the NXA-AVB/RGB Breakout Box)
section on
page 26.
Mini-USB connector:
• 5-pin Mini-USB connector used for programming, firmware update, and
touch panel file transfer between the PC and the target panel.
Note
: When connecting the panel to PC using a CC-USB (or compatible)
cable, be sure to power the panel On
before
attempting to connect the
USB cable from the PC to the mini-USB port on the panel. Refer to the
Step 5: Confirm and View the current AMX USB device
connections
section on page 100 for more information.
Operating / Storage
Environment:
• Operating Temperature: 10° C (50° F) to 40° C (104° F)
• Operating Humidity: 20% to 85% RH
• Storage Temperature: -20° C (-4° F) to 60° C (140° F)
• Storage Humidity: 5% to 85% RH
Included Accessories:
• Installation Kit for 12" and 17" NXD panels (KA2251-01):
- 2-pin mini-Phoenix connector (41-5025)
- Four Drywall clips (62-5924-05) and #6 - sheet metal screws
-
One
CAT5 Suppression Ferrites (04-0014)
- Three Phillips-head screws (#4-20 x 0.250 Black)
• Installation Kit for 15" and 17" NXT panels (KA2251-04):
- 2-pin mini-Phoenix connector (41-5025)
-
One
CAT5 Suppression Ferrites (04-0014)
- Three Phillips-head screws (#4-20 x 0.250 Black)
•
Included within the RGB Kit
(
FG
xxxx-xx
RGB
) is the following:
- Modero VG Touch Panel (NXD/NXT-1200/1500/1700VG)
- NXA-AVB/RGB Breakout Box (
FG2254-11
)
- NXA-RGB internal RGB/VGA Interface Card (
FG2260
)
- NXA-RGBCBL, 15-pin to 5X BNC RGB Breakout cable (
FG2250-80
)
- NXA-MTC/RGB Modero 10’ foot Table Top Cable
(with RGB connector) (CA2250-70)
•
Included within the Video Kit
(
FG
xxxx-x
V
) is the following:
- Modero VG Touch Panel (NXD/NXT-1200/1500/1700VG)
- Modero 10’ foot Table Top Cable (CA2250-50)
-
NXA-AVB/ETHERNET Breakout Box (
FG2254-10
)
Summary of Contents for Modero NXT-1500VG
