Amada RG35S-100, Operator'S Manual, Page: 71 / 110

V-27
Removing punches from front
WARNING
O
If the punch is 100 mm {4 in.} or more in
length, do not remove it from the front of
the machine. You cannot safely support
it with your hand or hands.
1 Turn down the
unclamp stopper pin,
and turn the punch
holder lever to the
position
◯
C
.
2 Hold the sides of the
punch as shown right,
and remove the
punch from the front
of the machine.
3 Turn the punch holder
lever clockwise to the
position
◯
A
, and turn
up the unclamp
stopper pin.