Amada RG35S-100, Operator'S Manual, Page: 53 / 110

V-9
When optional one-touch punch holders (refer to page V-23)
are available:
1 Turn the punch holder lever or
levers counterclockwise as
shown right.
2 Slide the punch sideways to
remove it.
4-3. Removing dies
After removing the punches, remove the dies from the ram as described
below.
Removing 2V-dies
Loosen the die fixing bolts, and remove the die.
DIE
WASHER
BOLT
DIE FIXING BOLT
2V-DIE
DIE HOLDER
Removing 1V-dies for forming sashes
Remove the 1V-dies for forming sashes as described for the 2V-dies on
the above.
DIE HOLDER
DIE FIXING BOLT
1V-DIE
(FOR FORMING SASHES)
DIE HOLDER FIXING BOLT