Amada RG35S-100, Operator'S Manual, Page: 69 / 110

V-25
7-2-1. INSTALLING AND REMOVING PUNCHES FROM FRONT
WARNING
O
Before installing and removing the
punches, turn the POWER ON/OFF
keyswitch to OFF, remove the key from the
keyswitch, and keep it by yourself.
Installing punches from front
WARNING
O
If the punch is 100 mm {4 in.} or more in
length, do not install it from the front of the
machine. You cannot safely support it
with your hand or hands.
CAUTION
O
When installing
a punch from the
front of the
machine, push it
straight up.
If the punch is
pushed up
inclined, the
clamping plate remains open and allows
the punch to fall.
Check that the punch does not fall when
pulled down, and then release it.
1 Turn down the
unclamp stopper pin,
and turn the punch
holder lever
counterclockwise to
the position
◯
C
.
2 Hold the sides of the
punch as shown right,
and push the punch
upward so that it
becomes parallel with
the punch holder.