Amada RG35S-100, Operator'S Manual, Page: 68 / 110

V-24
Punch holder lever positions
Position
◯
A
Turn the lever to this position to install and remove the punches by
sliding them sideways.
NOTE
O
When the lever is turned to the position
◯
A
the punches cannot be installed
and removed from the front of the machine.
Position
◯
B
(Basic lever position)
Turn the lever to this position to clamp the punches and to install and
remove the lever itself.
Position
◯
C
Turn the lever to this position to install and remove 100 mm {4 in.} or
shorter sectionalized punches from the front of the machine.