Amada RG35S-100, Operator'S Manual, Page: 63 / 110

V-19
2 Remove the fixing
bolts of the clamping
plate of each punch
holder, and remove
the clamping plate.
3 Install the clamping
plates at the rear of
the punch holders,
and fasten them with
the fixing bolts.
FRONT
4 Install the punches. (Refer to “5. Installing tools” in this Part.)
6-3. Installing wide dies
With the machine model RG100 having bar attached to the clamping
plate at the top of the ram, removing the bar allows 90 mm {3.5 in.} wide
dies to be installed.