Amada RG35S-100, Operator'S Manual, Page: 55 / 110

V-11
5. INSTALLING TOOLS
WARNING
O
Never put your hand or hands between the
punches and dies.
O
When changing the tools, strictly observe
the following cautions:
{
Before installing the dies, turn the
POWER ON/OFF keyswitch to OFF,
remove the key from the keyswitch, and
keep it by yourself.
|
Before installing the punches, turn the
multiple closing limit setting handwheel
to close the ram to the desired position,
turn the POWER ON/OFF keyswitch to
OFF, remove the key from the
keyswitch, and keep it by yourself.
Never put your hand or hands between
the punch and die to support the
punch.
}
When you install the tools with an
assistant operator or operators, be sure
to coordinate your work with them.
O
Be sure to install the dies first and then the
punches.
5-1. Preparing for installing tools
Before installing the tools, wipe off the upper beam and ram tool
installation surfaces and tools, refer to “4-1. Preparing for removing
tools” in this Part, and set the multiple opening limit of the ram.