Amada RG35S-100, Operator'S Manual, Page: 11 / 110

I-5
j) Before adjusting the stoppers, turn the POWER ON/OFF keyswitch to OFF,
remove the key from the keyswitch, and keep it by yourself. Be sure to
adjust the stoppers from the rear of the machine.
k) Correctly set the position where the bending speed of the ram is to be
changed. If this position is not correctly set, the worksheet may start to
bend unexpectedly.
l) When bending a small worksheet, set the stroke length of the ram to 6 mm
{0.24 in.} or less, and hold the worksheet as shown on the next page. Take
care not to get your fingers pinched between the punches and dies or
between the punches and worksheet.
6 mm
{0.24 in.}
or less