Amada RG35S-100, Operator'S Manual, Page: 12 / 110

I-6
Hold the worksheet as shown below.
m) If your machine is equipped with an optional backgauge, push the
worksheet against the stoppers of the backgauge after the backgauge is
properly positioned. Otherwise the worksheet may be pushed forward
when the backgauge moves forward.
n) Use Amada genuine punches and dies on the machine. The machine
performs various controls by reference to the Amada genuine punches and
dies. Non-genuine punches and dies are different in brittleness and
allowable tonnage from the genuine punches and dies. Use of such non-
genuine tools may cause various troubles and detract from safety of the
machine.
o) Apply to the installed tools a pressure
that is not higher than the allowable
tonnage marked on them. Unless a
proper pressure is applied to them, the
tools may break and scatter in a
dangerous manner.
When 2V-dies are used, use the V-
groove toward the rear of the machine
for additional safety from breakage.