Amada ML-3015AS, Operation Manual, Page: 83 / 204

4 . Setting the Laser Light Output Schedule
83
ML-3030AS/3015AS
Chapter 2 V
arious Settings
Introduction Part
Inst
allat
ion and Preparation Part
Operating Part
Maintenance Part
Appendixes
4 . Setting the Laser Light Output Schedule
On the SCHEDULE screen, the laser light output schedules are set and registered by
giving SCHEDULE numbers.
If a registered SCHEDULE number is entered, the corresponding output schedules
can be called.
The setting items of laser output time and laser output value are different between
fixed waveform (FIX) and flexible waveform ( FLEX / CW).
SCHEDULE Screen (Fixed Waveform (FIX))
How to see the displayed items
: Settable item
PEAK POWER Sets the peak value of laser output (value when "FLASH1" to "FLASH3" are
100%). Regarding the actual laser output value ("FLASH1" to "FLASH3"), set
the ratio (%) to the peak value supposing that the set peak value is the refer-
ence value (100%).
<Note>
The settable peak value of laser output differs depending on the model.
ML-3030AS: 0.5 to 2.7 kW / ML-3015AS: 0.25 to 1.35 kW

SLOPE
Sets the up-sloping (the laser output becomes gradually stronger) time to
"FLASH1."
After setting "FLASH1", set this time in the range of

SLOPE ≤ FLASH1.
FLASH1 Sets the laser output time TIME [ms] and laser output value POWER [%] of the
first laser in the following range.
Laser output time (TIME [ms])
When "RESOL" is 0.1 ms: 0.2 to 50.0 ms
When "RESOL" is 0.05 ms: 0.20 to 50.00 ms
Laser output value (POWER [%]): 0 to 200%
The time of

SLOPE is included in the output time of FLASH1.
FLASH2
Sets the laser output time TIME [ms] and laser output value POWER [%] of the
second laser in the same range as that for the first laser.
FLASH3 Sets the laser output time TIME [ms] and laser output value POWER [%] of the
third laser in the same range as that for the first laser.
The time of

SLOPE is included in the output time of FLASH3.