Amada ML-3015AS, Operation Manual, Page: 153 / 204

4 . Commands
153
ML-3030AS/3015AS
Chapter 5 Laser W
elding by External Communication Control (RS-485 CONTROL)
Introduction Part
Operating Part
Maintenance Part
Appendixes
Installation
and
Preparation
Part
Data No . Item Data Range
02* Unused Fixed to 000
03*
[ENERGY] on the [MONITOR] screen
Laser Energy
000000 – 999999 (×0.01J)
04*
Number of laser power monitor waveforms
Total number of transmitted data with classification No.
between 01 and 20.
Fixed to 100
05* Flash pulse width 0000 – 5000 (×0.1ms)
01 Laser Power Monitor ― Waveform data 000 to 004
: :
20 Laser Power Monitor ― Waveform data 095 to 099
Data No . Item Data Range
01* Schedule No. of laser power monitor data 0000 – 0255
02* Laser power monitor waveform data 1/5 00000 – 99999 (×0.1W)
03* Laser power monitor waveform data 2/5 00000 – 99999 (×0.1W)
04* Laser power monitor waveform data 3/5 00000 – 99999 (×0.1W)
05* Laser power monitor waveform data 4/5 00000 – 99999 (×0.1W)
06* Laser power monitor waveform data 5/5 00000 – 99999 (×0.1W)
⇒ If the pulse width becomes long, the total number of waveform data can be con-
trolled to 100 or less by extending the measurement interval.
(Example)
* When the pulse width is 0.2 to 0.3 ms, a measured value is sent at intervals
of 0.005 ms.
* When the pulse width is 0.4 to 4.8 ms, a measured value is sent at intervals
of 0.05 ms.
* When the pulse width is 4.9 to 9.8 ms, a measured value is sent at intervals
of 0.1 ms.
* When the pulse width is 9.9 to 19.8 ms, a measured value is sent at intervals
of 0.2 ms.
* When the pulse width is 19.9 to 39.8 ms, a measured value is sent at intervals
of 0.4 ms.
* When the pulse width is 39.9 to 50.0 ms, a measured value is sent at intervals
of 1.0 ms.
⇒
Since the number of data to be sent each time is limited to 5, it is necessary to
change the classification No. according to the "number of waveform data of the
laser power monitor" sent by "R00 nn 04" to perform repeated reading.
50 LD ON Total Time
Data No . Item Data Range
01* [LD WORK TIME] on the [STATUS] screen 0000000 – 9999999 (×1H)