Amada ML-3015AS, Operation Manual, Page: 118 / 204

118
ML-3030AS/3015AS
3 . Operating Procedure
4
Stopping Laser Welding
CAUTION
During a laser light output or for 5 seconds immediately after a laser light output, do
not turn OFF the MAIN POWER switch .
(1) Press the "LD", "BEAM" and "GUIDE" setting buttons on each screen to set them
to OFF.
⇒
For ML-30□□AS-110, it has no safety shutter and no beamsplitter. Therefore, op -
eration of the “BEAM” setting button is not necessary.
(2) Turn OFF the CONTROL keyswitch.
The key can be pulled out.
(3) Turn OFF the MAIN POWER switch.
The power supply is turned OFF and the POWER lamp goes out.
⇒
Return the key of the CONTROL keyswitch to the laser safety supervisor so that
it can be kept in custody.