Amada ML-3015AS, Operation Manual, Page: 167 / 204

1 . Maintenance Parts and Standard Intervals of Inspection/Replacement
167
ML-3030AS/3015AS
Chapter 1 How to Perform Maintenance
Introduction Part
Operating Part
Maintenance Part
Appendixes
Installation
and
Preparation
Part
Part name Model No .
Operation
interval
(standard) (*1)
Contents of
operation (*2)
Protective glass Specified glass for output unit
Everyday Clean
— Replace (*7)
■ For the hatched portion, our engineer takes charge of maintenance work.
*1: The operation interval means the maintenance time or expected life of the
part, and is different from the warranty period.
*2: Part replacement is performed when any damage or defect is found or the
usable period ends.
*3: When the laser is stopped for a long time (for about one month), the usable
period of the lithium battery is shortened.
*4: An expected life of the safety shutter is 5 million times. Switching ON and
OFF of the safety shutter according to the ON/OFF state of the laser can
lead to shortening the operation interval. The safety shutter can be used
for a longer time by setting it to ON at startup of the equipment and keep-
ing it ON during the laser operation in principle.
*5: An expected life of the timesharing unit is 1 million times. When operating
the timesharing unit over the operation interval, the optical fiber may be
damaged by the optical axis deviation due to degradation in stop accuracy
of the timesharing unit. We recommend a periodic inspection.
*6: For ML-30□□AS-110, the dedicated optical fiber (incorporated directly in
the main unit) is used.
*7: We do not specify a degree of parallelism of our standard protective glass.
Therefore, the condensing position may be shifted before and after replac-
ing the protective glass due to individual differences. The protective glass
having a very small positional deviation is also available. Contact us as
needed.