Amada ML-3015AS, Operation Manual, Page: 48 / 204

48
ML-3030AS/3015AS
2 . Connecting the Optical Fiber
1
Cleaning the End Face of the Optical Fiber
(1) Remove the cap at the end of the optical fiber and check the end face of the opti -
cal fiber.
⇒
If it is not stained or dust is not attached, proceed to Step
2
.
⇒ Keep the recover cap in a clean place in custody. If a dirty cap is mounted again,
this will cause seizure.
(2) Remove the protective pipe at the end of the optical fiber.
(3) Place the cleaning paper on the end of the quartz block.
(4) Place a drop of HYPERCLEAN (EE-3310) in the quartz block area over the
cleaning paper. Wipe the quartz block by pulling the cleaning paper across it.
(5) Check that there is no stain, dust and streak on the end of the quartz block and
return the protective pipe.