Amada ML-3015AS, Operation Manual, Page: 34 / 204

34
ML-3030AS/3015AS
3 . Name and Function of Each Section on the Rear Side
(6) READY Lamp Lights up when the LD is turned on for outputting the laser.
(7) LASER Lamp Indicates that laser is being output.
(8) POWER Lamp When the MAIN POWER switch is turned ON, the POWER lamp
comes on so that the operator can check that the power supply has
been turned ON.
(9) SHUTTER Lamp
(1 to 2)
Stay(s) on while some (one) of the safety shutters 1 to 2 are (is) open.
(10) CONTROL Key-
switch
When the CONTROL keyswitch is turned ON with the MAIN POWER
switch ON, this keyswitch is operable. When the laser is not used, turn
OFF the CONTROL keyswitch and then pull out the key. The laser
safety supervisor should take charge of the keyswitch.
3 . Name and Function of Each Section on the Rear Side
This section explains each section on the rear side .
Function of Each Section on the Rear Side
(1) Connector Cover For the external I/O connectors.
(2) Power Supply
Terminals
Connect the terminals to a single-phase power supply of 200/220/240 V
AC, depending on specifications.
(With the connectror cover removed)
(6)
(3)
(8)
(2)
(1)
(5)
(4)
(9)
(13)
(14)
(12)
(11)
(10)
(15)
(7)
(16)