Amada ML-3015AS, Operation Manual, Page: 82 / 204

82
ML-3030AS/3015AS
3 . Changing the Equipment Settings
Displaying the INITIALIZE Screen
(1) Turn OFF the CONTROL keyswitch and turn ON the MAIN POWER switch.
Power is supplied and the POWER lamp comes on.
(2) While the KEY SWITCH CHECK screen is displayed, press the “INITIALIZE” but-
ton and the right button (red portion in the above figure) of the laser controller
simultaneously.
⇒
Unless the CONTROL keyswitch is OFF, the KEY SWITCH CHECK screen does
not appear.
The INITIALIZE screen appears.
SYSTEM
F1
F2
F3
F4
F5
F6
F7