Altigen Altiware OE 4.5 System Administration & Installation Manual Download Page 77 | Manualshive

Page: 77 / 455

Altigen Altiware OE 4.5 System Administration & Installation Manual Download Page 77

To Begin New Installation

48

AltiWare OE System Administration Manual

If your machine is a stand-alone server, you need to login as a local
administrator account.

Note:

If you plan to run Exchange Integration, you must have domain
administrator rights.

4.

Insert the AltiWare OE CD-ROM into the CD-ROM drive.

5.

Select and read the Readme.txt file.

6.

After reading the Readme.txt file, click on SETUP.EXE in the
AltiWare OE folder.

7.

At the Welcome page window, exit all Windows programs before
continuing with the setup, then click Next.

8.

Setup will retrieve logon information to determine if the user has
corresponding privilege.

9.

Setup will retrieve system key and install its driver, if applicable. If the
system key is not available, you may still continue with setup.
However, you cannot perform the license registration process (to
activate your licenses) without the system key.

«
...
75
76
77
78
79
...
»

Summary of Contents for Altiware OE 4.5








































































































































































































































































































































































































































































Reviews:

No comments