Altigen Altiware OE 4.5, System Administration & Installation Manual, Page: 159 / 455

Defining an IP Dialing Table
130 AltiWare OE System Installation & Administration Manual
Use Caution Before Changing the Dialing Length
The dialing length can be changed without having to re-install or re-start
AltiWare IP. However, if this number is changed, the location IDs are all
altered—so that it is advisable to keep the original length if it works well.
If you increase the location ID length, the number 0 is added to the front of
the location IDs. For example, if you change the length from 2 to 3, location
IDs 02 and 27 will become 002 and 027 respectively.
If you decrease the number of digits in the location ID, the last digit is
dropped from location IDs. For example, Location ID 240 becomes 24.
There is an exception to this truncation method: if the leading digit is 0, it
is dropped. For example, 048 becomes 48.
Defining the IP Dialing Table
To access the IP Dialing Table window, select System Configuration... on
the Management menu, then click the IP Dialing Table tab.
Figure 16. Dialing Table window, System Configuration