Altigen Altiware OE 4.5, System Administration & Installation Manual, Page: 162 / 455

System Configuration
AltiWare OE System Installation & Administration Manual 133
Sy
st
em
Configu
ra
tion
Sy
st
em
Configu
ra
tion
To access DNIS routing, select System Configuration... on the
Management menu, then click the DNIS tab.
Figure 17. DNIS window, System Configuration
Adding and Deleting DNIS Route Entries
To add entries to the DNIS routing table, click the Add button. In the dialog
box that appears, type in a DNIS Number and a descriptive DNIS Name,
then click OK.
The number and name entries have the following requirements:
• The DNIS Number must be devoid of all characters except the
numbers 0–9 (the hyphen is not accepted in this dialog box). For
example, 2529876 is a good entry, but 252-9876 is not.
• The DNIS Name is descriptive and optional; it can be used to remind
you about the nature of the number and routing. For example, you
might give the 2529876 number the name, “Tech Support.”
To delete an entry, select it in the DNIS number list, then click Delete.