manualshive.com logo in svg

Altigen Altiware OE 4.5, System Administration & Installation Manual, Page: 373 / 455

Share
Download
Altigen Altiware OE 4.5 System Administration & Installation Manual Download Page 373

AltiDBReader

344

AltiWare OE System Installation & Administration Manual

6.

To delete a DB folder, right-click on any DB folder (except “Current”)
and select Delete DB.

To Show/Export/Print Search Results Data:

•

To print the search results data, select the desired DB folder and click
the Print button.

•

To show Advanced Call Info or Call Info, right click on any data field
and scroll to the desired option.

•

To export the search results data as a .CSV file, right-click on any data
field and select Export.

To Convert 4.0 or 4.0a DB files:

1.

Select and highlight a DB folder from the CDR 4.0 directory.

2.

Go to File>Convert Old DB.

3.

The converted 4.0/4.0a file appears in the DBReader window fields.

Summary of Contents for Altiware OE 4.5








































































































































































































































































































































































































































































Reviews:

No comments