Altigen Altiware OE 4.5, System Administration & Installation Manual, Page: 116 / 455

Software Installation
AltiWare OE System Administration Manual 87
S
o
ft
wa
re
In
s
ta
lla
ti
on
Setup cannot append the AltiServ
path because your existing system
environment is too long. You must
manually append the AltiServ path
to your system environment path
after finishing AltiServ’s
installation but before restarting
your system. You can find the
system environment path through
Control Panel>System
>Environment>path. Manually append c:\AltiServ\exe (if
AltiServ is installed on c: drive) to your
system environment path (through Control
Panel>System >Environment>path) after
finishing AltiServ’s installation but before
restarting your system.
Unable to add AltiServ path to the
system. Manually append c:\AltiServ\exe (if
AltiServ is installed on c: drive) to your
system environment path (through Control
Panel>System >Environment>path) after
finishing AltiServ’s installation but before
restarting your system
Failed to upgrade AltiWare
databases. The previous database may be corrupted.
Restore the last, known working database
and try again. If error persists, contact your
Authorized AltiGen Dealer.
Error Message Solution