Altigen Altiware OE 4.5, System Administration & Installation Manual, Page: 229 / 455

Setting up Extensions
200 AltiWare OE System Installation & Administration Manual
While the IP extension is logged in, the user can activate the physical
extension on a phone using the #27 feature code. This logs off the IP
extension.
Setting the Line Properties
For a physical extension, you can configure hardware options on the board
port used for the extensions. To do so, select the extension number in the
list of extensions, then click the Line Properties button to open a dialog
box that is specific to the board using for the extension.
The Line Properties are somewhat different for Quantum Board than for
Triton Analog Station Boards. The subsequent sections deal first with
Quantum, then with Triton Analog Station.
Quantum Line Properties
If you select a Quantum board extension and click Line Properties, you’ll
see the Quantum Line Properties dialog box. Note that you can use the
Apply to… button to apply these hardware settings to one, some, or all
ports on the board. Using Apply to… is discussed in “Apply or Apply
To…?” on page 190.
Figure 5. Quantum Line Properties dialog box for extensions