Manual
TdC 8001
-72-
Modify times:
In Dual Timer the times can be copied from one start number to another, invalid times can be made valid
or times can be entered manually. Use <INPUT> of keypad (12) to change times of the blue course, the
one of keypad (8) for changing times of the red course.
−
Change finish time of corresponding course with <INPUT>
−
Change start time of corresponding course with <ALT> and <INPUT>
−
Change run and intermediate times of corresponding course with <MENU> and <INPUT>
Ranking:
A ranking can be issued for both or for each individual course.
Rank calculation:
The rank calculation can be carried out for both courses or for each of them separately. Settings for rank
calculation in main menu (menu 30: rank calculation).
Start channel:
The start can take place for both courses at the same time or for each one of them separately. Settings
for start procedure in main menu (menu 29: start channel). If the joint start channel is used, the time for
both courses is started no matter if channel c0 or channel c3 was triggered.
Course identification:
The courses can be marked with r (red) and b (blue) or r (right) and l (left). Selection for marking in main
menu (menu 27: channel ID 4).
Channel assignment
c0 = start channel red (right)
c1 = finish channel blue (left)
c2 = intermediate time 1 red (right)
c3 = start channel blue (left)
c4 = finish channel blue (left)
c5 = intermediate time 1 blue (left)
c6 = intermediate time 2 red (right)
c7 = intermediate time 2 blue (left)
c8 = intermediate time 3 red (right)
c9 = intermediate time 3 blue (left)
Default main menu:
Menu 1
delay time start
= 1.0 sec.
Menu 2
delay time finish
= 0.3 sec.
Menu 3:
seconds mode
= off
Menu 4:
display time 1
= 3 sec.
Menu 5:
display time 2
= 3 sec.
Menu 8:
running time
= heat
Menu 9:
running tenth
= off
Menu 10: intermediate time rank
= on
Menu 11: run time rank
= on
Menu 14: print start time
= off
Menu 16: paperfeed
= 0
Menu 17: RS232 baud rate
= 9600 baud
Menu 18: RS232 run time
= off
Menu 19: d-board baud rate
= 2400 baud
Menu 20: d-board channel 2
= running
Menu 21: beep
= on
Menu 23: groups
= off
Menu 24: change heat
Menu 25: change race
Menu 26: d-board test
Menu 27: ID channel 4
= b (blue)
Menu 29: start channel
= separate
Menu 30: rank calculation
= separate
Menu 55: LED-brightness
= 9
Menu 59: pulse from radio
= all channels off
Menu 62: extern beep
= all channels off
Summary of Contents for TDC8001
