ALGE-Timing TDC8001, Manual

Page: 34 / 112

Manual
TdC 8001
-34-
−
The entered start number with corresponding time is saved and printed
− The same time is still on the info display (7):
Memo: 1 C1 13:05:11.3453 No: _ first time in memory, channel 1
1
− Enter start number (finish keypad 8), e. g. start number 10
− Confirm start number with <ENTER>
−
The entered line vanishes and the MEMO memory is empty
− Exit by pressing <MEMO>
Attention: You can exit the MEMO menu at any time (press <MEMO>) and arrivals can be edited. In
order to process the MEMO memory, press <MEMO> and enter the start numbers.
A wrong time can be cleared from the MEMO memory with <CLEAR> of the finish keypad (8).
Every memory time is shown and output with consecutive number. This helps to find times later on. In
case times are cleared with <CLEAR>, they can be found in <INPUT> under start number 0.
With <CLEAR> cleared memo times are marked with a capital “C”.
With <CLEAR> cleared run times are marked with a small “c”.