Manual
TdC 8001
-66-
Block finish times:
The finish time of each course can separately be blocked. If <BLOCK> of keypad (12) is pressed, the
finish time of the blue (left) course (c4) is printed invalid (time of day with ?). If <BLOCK> is pressed on
the finish keypad (8), the time of the red (right) course (c1) is printed invalid (time of day with ?). Pressing
<ALT> and <BLOCK> at the same time swallows the corresponding impulse.
Enter times:
<INPUT> has no function
Ranking:
<CLASS> has no function
Course identification:
The courses can be identified with r (= red) and b (= blue) or r (= right) and L (= left). The selection for
the identification if the course is marked with b or L is executed in the main menu (menu 27: Idenfication
channel 4)
Photocells for finish:
−
Red (right) course is connected to channel 1 (cable 001-10 in jack A’)
−
Blue (left) course is connected to channel 4 (cable 001-10 in jack A)
Photocells for 1
st
intermediate time:
−
Red course on channel 2
−
Blue course on channel 5
Photocells for 2
nd
intermediate time:
−
Red course on channel 6
−
Blue course on channel 7
Photocells for 3
rd
intermediate time:
−
Red course on channel 8
−
Blue course on channel 9
Channel assignment
c0 = start channel (= c3)
c1 = finish channel red
c2 = intermediate time 1 red
c3 = start channel (= c0)
c4 = finish channel blue
c5 = intermediate time 1 blue
c6 = intermediate time 2 red
c7 = intermediate time 2 blue
c8 = intermediate time 3 red
c9 = intermediate time 3 blue
Preset main menu:
Menu 1
delay time start
= 1.0 sec.
Menu 2
delay time finish
= 0.3 sec.
Menu 3:
seconds mode
= off
Menu 4:
display time 1
= 3 sec.
Menu 5:
display time 2
= 3 sec.
Menu 8:
running time
= run
Menu 9:
running tenth
= off
Menu 14: print start time
= off
Menu 16: print linefeed
= 0
Menu 17: RS232 baud rate
= 9600 baud
Menu 18: RS232 run time
= off
Menu 19: d-board baud rate
= 2400 baud
Menu 20: d-board channel 2
= running
Menu 21: beep
= on
Menu 24: change heat
Menu 25: change race
Menu 26: d-board test
Menu 27: ID channel 4
= b (blue)
Menu 28: penalty time
= 1.500 sec.
Menu 53: bib-counting
= manual
Menu 55: LED-brightness
= 9
Menu 59: pulse from radio
= all channels off
Menu 60: startnumber-info RS232
= off
Menu 62: extern beep
= all channels off
Menu 63: RS485 user
= Wireless TN (WTN)
Summary of Contents for TDC8001
