ALGE-Timing TDC8001, Manual

Page: 32 / 112

Manual
TdC 8001
-32-
4.3.2.4.2
Edit Memory Time
You can edit as follows: - Overwrite the memory time with finish key (8)
- Copy memory time to another start number
- Disqualify a competitor
Change memory time:
−
Press both <MENU> and <INPUT>
− Press <F2> (only possible in second or any heat after that) and then <ENTER>
−
Info display show current run time of start number shown on finish display (6):
Input: 0015 MT 00:01:35.139 NEW No F1 e. g. start number15
DISQU. F2
−
If you want to change another start number, input directly or select with

and

.
−
When the correct start number shows, press <ENTER> (finish keypad 8)
− The cursor is now on first digit of the time.
Input: 0015 MZ 00:01:35.139< NEW No F1 The currently valid time can be
DISQU.
F2 overwritten.
−
You can overwrite the time with the number keys of keypad (8) (manual input of run time).
− If you want to assign the marked memory time also to another start number, press <F1> and
enter the new start number.
−
You can disqualify a competitor with <F2>; start, finish and run time are cleared.
−
Leave the menu by pressing both <MENU> and <INPUT> of finish keypad (8).
Attention: If memory time is 00:00:00.000, no memory time has yet been assigned. An overwritten
memory time is marked with c, e. g. c0009 MZ 00:01:35.139
4.3.2.4.3
Change Intermediate Times
You can edit as follows:
−
Overwrite intermediate time with finish keypad (8)
− Copy intermediate time to another start number
Change intermediate times:
−
Press both <MENU> and <INPUT> (finish keypad)
−
Press <F2> (1. heat) or <F3> (2. heat) and then <ENTER>
− Input channel number for editing the intermediate time:
Input channel number: #
e. g. channel 2
Save with: ENTER
− Input channel number (2 – 9) with finish keypad (8), confirm with <ENTER>
− Info display shows current intermediate time of start number shown on finish display (6):
Input: 0015 C2 00:00:34.557 NEW No
F1 e. g. start number 15
CLEAR F2 clear intermediate time
− If you want to change another start number, input directly or select with

and

.
−
When the correct start number shows, press <ENTER> (finish keypad 8)
−
The cursor is now on the first digit of the time.
Input: 0015 C2 00:00:34.557 NEW No F1 The currently valid time can be
CLEAR
F2 overwritten.
−
You can overwrite the time with number keys of keypad (8) (manual input of intermediate time)
− If you want to assign the marked intermediate time also to another start number, press <F1>
and enter new start number.
−
If you want to clear the intermediate time, press <F2> and <ENTER>.
−
Leave the menu with <NO>.
Attention: If intermediate time is 00:00:00.000, no intermediate time has yet been assigned. An overwrit-
ten intermediate time is marked with c, e. g. c0009 C2 00:01:35.139