Manual
TdC 8001
-86-
6.8.2 10-Channel Timer 2, Program 102
The 10-channel timer 2 is a universal program with many application possibilities. It has a start channel
(c0) and nine finish channels (c1 to c9). Every finish channel can be assigned with any number of the
same number. Output of timing channels c1 to c9 is addressed to separate display boards. Main purpose
of this program is to time runs with several courses, joint starts and separate finishes.
Example:
Four competitors are to start at the same time, each on a separate course. In the finish every competitor
is stopped by a separate photocell. Every time is shown separately on a display board.
lane 1:
channel 1 cable 001-xx on jack A
display board on position 1
lane 2:
channel 4 cable 001-xx on jack B
display board on position 4
lane 3:
channel 7 cable 001-xx on jack C
display board on position 7
lane 4:
channel 2 cable 003-xx on jack A'
display board on position 2
When charging the TdC 8001 during timing the photocell adapter 018--5 is required. The photocell
adapter is connected at jack A. Photocell cable and net supply device are connected at adapter.
Activation procedure:
−
turn on TdC 8001 (switch g)
−
select program 10-channel timer with cursor keys, <ENTER>
−
select program 10-channel timer 2 with cursor keys, <ENTER>
−
clear memory for used race, <ENTER>
−
select race, <ENTER>
−
select precision, <ENTER>
−
select timing mode, <ENTER>
−
select start mode, <ENTER>
−
press <YES> for entering groups otherwise <NO> and <ENTER>
−
when entering groups always enter last number of the group
−
confirm every input with <ENTER>
−
after entering start number of last group, press <ENTER>
−
synchronize TdC 8001 (possibly with other timing devices)
−
press <F1> for confirming time of day
Summary of Contents for TDC8001
