Manual
TdC 8001
-75-
−
display (1) and display (6) must show correct start number (and group)
−
display (5) shows 000.00 as speed
−
first impulse of channel c0 arrives
−
display (1) shows next to start number “L” as indication that the competitor passed the first
photocell (channel c0)
−
display (5) shows rank and speed
−
Using start number automatic, display (2) and (8) switch after display time 1 to next number
Channel assignment
c0 = speed measuring channel c5
c1 = speed measuring channel c6
c2 = no function
c3 = no function
c4 = no function
c5 = no function
c6 = no function
c7 = no function
c8 = no function
c9 = no function
Default main menu:
Menu 1
delay time start
= 1.0 sec.
Menu 2
delay time finish
= 0.3 sec.
Menu 4:
display time 1
= 3 sec.
Menu 11: run time rank
= on
Menu 16: printer linefeed
= 0
Menu 17: RS232 baud rate
= 9600 baud
Menu 18: RS232 run time
= off
Menu 19: d-board baud rate
= 2400 baud
Menu 21: beep
= on
Menu 23: groups
= off
Menu 25: change race
Menu 26: d-board test
Menu 31: print times
= off
Menu 32: distance
= 100 m
Menu 33: measuring unit
= km/h
Menu 34: min. speed
= 10 km/h
Menu 35: max. speed
= 200 km/h
Menu 53: bib-counting
= manual
Menu 55: LED-brightness
= 9
Menu 59: pulse from radio
= all channels off
Menu 62: extern beep
= all channels off
Menu 63: RS485 user
= Wireless TN (WTN)
Measuring distance:
The distance between both photocells (or other impulse transmitters) can be entered between 1 and
9999. The measuring distances is always entered in meters irrespective of the measuring unit. The
measuring distance is set in menu 32.
Measuring unit:
Selection between the following units is possible:
−
km/h
kilometres per hour
−
m/s
meters per second
−
mph
miles per hour
The measuring unit is set in menu 33. When the unit is changed the minimum and maximum speed is
automatically converted into the new unit.
Minimum and maximum speed:
The minimum and maximum speed can be set. In case a speed is measured that falls below the mini-
mum speed or exceeds the maximum speed it is not accepted. The minimum speed is set in menu 34
and the maximum speed in menu 35. In every menu values of 1 to 9999 are possible; the unit corre-
sponds to the one set in menu 33.
e. g.: min. speed = 60 km/h, max. speed = 120 km/h
Only speeds in the ranke of 60 to 120 km/h are shown
Summary of Contents for TDC8001
