ALGE-Timing TDC8001, Manual

Page: 28 / 112

Manual
TdC 8001
-28-
4.3 Edit Times
4.3.1 Edit Start Times
4.3.1.1
Clear Start Time
−
<CLEAR> on the start keypad (12) clears the start time for the set start number shown on display
(1).
− The start times of this start number is shown with c as cleared in the memory and print out.
−
The RS232 interface sends the following:
c0043 C0 10:34:13.384
4.3.1.2
Restore Cleared Start Time
− Key combination <ALT> and <CLEAR> of the start keypad (12) restores the cleared start time
for the start number shown on display (1).
−
The time of this start number is now saved as valid start time in the memory.
−
The printer prints the start time as valid start time.
− The RS232 interface sends the following: 0043 C0 10:34:13.384
4.3.1.3
Edit Start Time
Press <INPUT> of the start keypad (12) to edit the start time of the start number shown on display (1).
The following possibilities for editing are available:
− Overwrite the start time with the start keypad (12)
−
Copy the start time to another start number
− Change invalid start time to valid start time
Input functions:
−
Press <INPUT> of start keypad (12)
−
Info display (7) shows the current start time of the start number shown on start display (1):
Input: 0015 C0 13:15:35.486 NEW No F1 e. g. start number 15
− The last digit of the start number blinks, change or confirm with <ENTER>.
− For changing the start number enter a new number or select one with

and

.
− Confirm with <ENTER> when the correct number shows (start keypad 12).
−
The cursor is now on the first digit of the time in the first line. In case several times exist for this
start number, the info display shows for example as follows:
Input: 0015 C0 13:15:35.486< NEW No F1 valid time
c0015 C0 13:10:12.498 cleared time
?0015 C0 13:17:28.938 invalid time
− The last digit of the start number blinks. Change or confirm <ENTER>.
−
You can overwrite the first time with the number keys of the start keypad (12) (manual input of
start time).
− Select correct time with

and

. With <ENTER> confirm this time as valid.
−
If the marked time should also be assigned to another start number, press F1 and enter the new
start number.
− Leave the INPUT Menu with pressing <INPUT> on start keypad (12).
Attention: If start time 00:00:00.000 is displayed, no start time has been assigned to this start number
yet. Overwritten start times are marked with c, e. g.: c0009 ST 12:13:21.115
Group start:
The input of group start times is just as for single start times. Instead of the start number
the group is shown on display (1). The input always applies for all start numbers of the group.