ALGE-Timing TDC8001, Manual

Page: 85 / 112

Manual
TdC 8001
-85-
Printer: example of printout
0001 SZ 10:52:04.9900 start time
C1 10:52:49.8958
Finish time
LZ 0:44.90 Run time channel 1 (erste Zeit von Startnr. 1 auf channel 1)
0001 SZ 10:52:04.9900 Start time
C2 10:52:49.8958 Finish time
LZ 0:45.47 Run time channel 2
0001 SZ 10:52:04.9900
Start time
C1 10:52:51.5165 Finish time
LZ 0:46.52
Run time channel 1 (zweite Zeit v. Startnr. 1 auf channel 1)
Display board (D-LINE and GAZ):
The run time (running time) and start number/rank can be displayed each on an
ALGE
display board. The
current number indicated on display (6) is always displayed (on display board number 3-digit, rank 2-
digit). In main menu (see menu 20) channel 2 can be activated. When working with channel 2, only the
stopped time is shown on display board (no running time).
start number
rank thumb-wheel switch toggle switch
on 0 up
run time and
running time thumb-wheel switch toggle switch
on 0 middle
RS232c Interface: see chapter 8.2