ALGE-Timing TDC8001, Manual

Page: 30 / 112

Manual
TdC 8001
-30-
4.3.2 Edit Finish Times
4.3.2.1
Clear Finish Times
−
<CLEAR> of finish keypad (8) clears the finish time of the start number shown on display (6)
− display (7) shows again a running time
− The finish time of this start number is marked with a c as cleared in the memory.
−
The RS232 interface and the printer output the time with c as cleared.
4.3.2.2
Restore Cleared Finish Time
− The key combination <ALT> and <CLEAR> (finish keypad 6) restores the cleared finish time for
the start number shown on display (1)
−
Display (7) shows the corresponding run time.
− The finish time of this start number is saved as normal in the memory.
− The printer prints start time, finish time and run time.
− The RS232 interface sends the valid finish time.
4.3.2.3
Change Finish Time
Press <INPUT> of the finish keypad (8) to edit the finish time of the start number shown on display (6).
The following possibilities for editing are available:
− Overwriting of the finish time with finish keypad (8)
−
Copy finish time to another start number
−
Change an invalid finish time into a valid one
− Disqualification of a competitor
Input functions:
−
Press <INPUT> of finish keypad
−
Info display show the current finish time of the start number shown on finish display (6):
Input: 0015 C1 13:15:35.486< NEW No F1 e. g. start number 15
DISQU.
F2
−
The last digit of the start number blinks. Change or confirm number with <ENTER>.
− In case you want to change a different start number, directly enter it (finish keypad 8) or select
with

and

.
−
If the correct start number shows, press <ENTER> (finish keypad 8)
− If there are several times for this start number, the info display shows e. g. as follows:
Input: 0015 C1 13:25:35.446< NEW No F1 currently valid time
c0015 C1 13:24:12.438 DISQU. F2 with CLEAR cleared time
?0015 C0 13:38:28.954 invalid time (e. g. by BLOCK)
−
Select the correct time with

and

. If you press <ENTER> this time is saved as valid time.
−
You can also overwrite the first time with the number keys of the finish keypad (8) (manual input
of finish time).
− You can assign the marked time additionally to another start number with <F1> and input of the
new start number.
−
You can disqualify the start number with <F2>. A disqualified time is marked with a “d”. The
disqualification invalidates start, finish and run time of the corresponding start number.
−
Leave the INPUT menu by pressing <INPUT> of finish keypad (8).
Attention: A finish time of 00:00:00.000 means that this start number has not yet any time. An overwritten
time is marked c. E. g.:
c0009 ZZ 12:13:21.115