ALGE-Timing TDC8001, Manual

Page: 54 / 112

Manual
TdC 8001
-54-
−
Start impulse for number 2 is effected
− Display (1) automatically jumps to next start number
− Finish impulse of start number 1 is effected
−
Display (5) shows run time of start number 1
−
Start impulse for number 3 is effected
− Display (1) automatically jumps to next start number, <ENTER>
− Display (5) shows run time of start number 2
−
Finish impulse of start number 2
−
Display (5) zeigt the Run time von Start number 2
− etc.
Channel assignment
c0 = start channel
c1 = finish channel
c2 = intermediate time
c3 = intermediate time
c4 = intermediate time
c5 = intermediate time
c6 = intermediate time
c7 = intermediate time
c8 = intermediate time
c9 = intermediate time
Default main menu:
Menu 1: delay time start = 1.0 sec.
Menu 2 delay time finish = 0.3 sec.
Menu 3: seconds mode = off
Menu 4: display time 1 = 3 sec.
Menu 5: display time 2 = 3 sec.
Menu 6: display thousandth = off
Menu 7: info display = finish
Menu 8: running time = heat
Menu 9: running tenth = off
Menu 10: intermediate time rank = on
Menu 11: finish rank = on
Menu 12: start number automatic = off
Menu 13: automatic time = 00:00:00.00
Menu 14: print start time = off
Menu 16: printer linefeed = 0
Menu 17: RS232 baud rate = 9600 baud
Menu 18: RS232 run time = off
Menu 19: d-board baud rate = 2400 baud
Menu 20: d-board channel 2 = running
Menu 21: beep = on
Menu 22: handicap time = 00:00:00.00
Menu 23: groups = off
Menu 24: change heat
Menu 25: change race
Menu 26: d-board test
Menu 53: bib-counting = manual
Menu 55: LED-brightness = 9
Menu 56: delaytime to next StNo = 3
Menu 59: pulse from radio = alle Kanäle aus
Menu 60: startnumber-info RS232 = aus
Menu 61: next syncimpulse
Menu 62: extern beep = alle Kanäle aus
Menu 63: RS485 user = Wireless TN (WTN)
Menu 64: last impuls validity = 0,00 Sekunden