ALGE-Timing TDC8001, Manual

Page: 80 / 112

Manual
TdC 8001
-80-
6.7 Carving, Program 9
Count-down at zero with horn, after that time runs upwards start-
ing at zero. The count-down time can freely be entered. Any num-
ber of competitors can be on the course at the same time. Up to
eight intermediate times can be measured (c2 to c9). The pro-
gram carving is only intended for one heat. A ranking is not pos-
sible as no points can be entered at the timing device.
Activation procedure:
− turn on TdC 8001 (switch g)
−
select program CARVING with cursor keys and <ENTER>
−
clear memory for used race and <ENTER>
− select race and <ENTER>
− select precision and <ENTER>
−
select timing mode and <ENTER>
−
select start mode and <ENTER>
− <YES> for entering groups, otherwise <NO> and <ENTER>
− when entering groups, always enter the last number of a
group
−
confirm every input with <ENTER>
− if start number of last group is entered, press <ENTER>
−
synchronize TdC 8001 (possibly with other
ALGE
timing de-
vices)
− press <F1> to confirm indicated time of day
−
at next full minute start impulse is issued via
channel c0
− TdC 8001 is ready for timing
− press <F2> is display (5) shows wrong time of day
−
enter time with finish keypad (8) and confirm with <ENTER>
−
start clock with start signal (<START> or channel c0)
Race procedure:
−
enter * and + on keypad (9), middle segment of displays (1) is at top
−
press <MENU> and <ALT> at the same time
− go to menu 43: countdown time
−
select menu 43 with <YES>
−
enter desired countdown time (with keypad (9))
−
confirm countdown time with <ENTER>
− exit menu by pressing <NO>
− enter start number for start with start keypad (12) and <ENTER>
−
display (1) must show correct start number (and group)
−
enter start number for finish with finish keypad (8) and <ENTER>
− display (8) must show correct start number (and group)
−
start impulse for number 1 effected (from channel c0)
−
display (1) changes automatically to next start number
− display (5) shows running countdown time
− finish impulse number 1 effected
−
display (5) shows countdown time of number 1
−
start impulse for number 2 effected
− display (1) changes automatically to next start number
− enter start number for finish with finish keypad (8) and <ENTER>
−
display (5) shows running countdown time of number 2
−
finish impulse number 2 effected
− display (5) shows countdown time of number 2
− etc.